Yamaha SY-77 Operating Manual Download Page 203 | Manualshive

Page: 203 / 268

background image

SONG MODE

SONG EDIT JOBS

9. Move clock

Summary: This operation moves the specified mea-

sures of the track forward or backward in time.

Procedure:

From: song edit job directory (JUMP #600)

Select: 09:MovClck (JUMP #609)

Specify: the track which you wish to move in

time and set the number of clocks by
which to move it.

To execute: the operation press ENTER.

To quit: without executing press EXIT.

Area (001...999): The measures beginning with
the specified Top Measure and ending with the

specified Last Measure will be moved in time.

Clock (-99...+99): Specify the number of clocks

(units of l/96th of a quarter note) by which the

track is to be moved. Positive settings will move
the track forward in time so that it plays later.
Negative settings will move the track backward
in time so that it plays earlier.

Remarks: It is often effective to use clock move to

compensate for voices that have a slow attack.
For example strings often have a slower attack
than other voices, and will appear to be lagging
behind the other voices even if the note on mes-
sages are actually simultaneous. In such cases
you can use move clock to move the strings
track earlier in time so that the string voices
begin playing a bit before than the other voices,
giving the impression of perfect timing.

SONG EDIT JOBS

10. Copy measure

JUMP #510

Summary: This operation copies a specified range of

measures in the track to another location in any
number of tracks.

Procedure:

From: song edit job directory (JUMP #600)

Select: 10:CpyMeas (JUMP #610)

Specify: the area of source measures from

which you wish to copy, the destina-
tion measure to which the data will be
copied, and the number of times that
the data will be copied. Press the
memory keys 1-15 to specify one or
more destination tracks. The memory
LEDs 1-15 will light red to indicate
the selected destinations.

To execute: the operation press ENTER.

To quit: without executing press EXIT.

Source (001...999): The measures beginning
with the specified Top Measure and ending with

the specified Last Measure will be copied.

Destination (001...999): The data will be copied
into the same track starting at the specified Top
Measure.
Copy (1...99): The specified source measures
will be copied as many times as specified here.

Example: For track data as shown in the following

diagram,

191

«
...
201
202
203
204
205
...
»

Summary of Contents for SY-77













































































































































































































































































Reviews:

No comments

Related manuals for SY-77

Brand: Harris Pages: 72

Brand: Freeman Pages: 31

Brand: Waldorf Pages: 126

Brand: 360 Systems Pages: 6

Brand: Satel Pages: 2

Brand: CORNFIELD ELECTRONICS Pages: 2

Brand: Xaoc Devices Pages: 8

Brand: Oberheim Pages: 20

Brand: Yamaha Pages: 8

Brand: Yamaha Pages: 39

Brand: twisted electrons Pages: 10

Brand: Stagg Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands