manualshive.com logo in svg

Yamaha SY-77, Operating Manual

The Yamaha SY-77 is a powerful digital synthesizer known for its versatility and high-quality sound. To explore its full potential, make sure to download the free Operating Manual from our website. Unlock the full potential of this amazing instrument with our comprehensive and user-friendly manual.

Share
Download
background image

SONG MODE

(30...250): While recording you can move the

cursor here to modify the tempo.
Used (0...100%): As you record this will in-
crease to show the amount of sequencer memory
that has been used.
Click (off, rec, rec/play, always): While recording
you can move the cursor here and specify when
the click (metronome) will sound.

off: The metronome will not sound.
rec: The metronome will sound only during

recording.

rec/play: The metronome will sound during

recording or playback.

always: The metronome will sound constantly.

Click Beat (1/4, 1/6, 1/8, 1/12, 1/16, 1/24): While
recording you can move the cursor here and
specify the beat on which the click will sound.
While recording or playing back, the RUN LED
will blink green on each beat and blink red on the
first beat of each measure.

Remarks: While recording you can modify the set-

tings for tempo, click, and click beat. To modify
the other parameters you must return to the

song record display.

SONG RECORD

Punch-in recording

Summary: In punch-in recording the notes you play

will be recorded in the exact timing with with
you play them, but only over the measures you

specify.

Procedure:

From: song record display

Press: F3 (Pnch) to select punch-in recording

Specify: the measures over which recording

will take place.

To begin: recording select the track to be

recorded and press  R U N . The RUN
LED will blink to the tempo.

To stop: recording and return to the song play

display press STOP.

Measure (001... 999): As you record this will

advance to show the number of the measure cur-
rently being recorded.

(30...250): While recording you can move the

cursor here to moony the tempo.
Used (0...100%): As you record this will in-
crease to show the amount of sequencer memory
that has been used.
From Measure (001...999): When the beginning

of this measure is reached, recording will begin.

The notes you play will replace the previous
data in the track.
To Measure (001...999): When the end of this
measure is reached recording will end, but the

song will continue playing back.
Click (off, rec, rec/play, always): While recording
you can move the cursor here and specify when
the click (metronome) will sound.

off: The metronome will not sound.
rec: The metronome will sound only during

recording.
rec/play: The metronome will sound during
recording or playback.

always: The metronome will sound constantly.

Click Beat (1/4,1/6, 1/8, 1/12, 1/16, 1/24): While
recording you can move the cursor here and
specify the beat on which the click will sound.

Remarks: While recording you can modify the set-

tings for tempo, click, and click beat. To modify
the other parameters you must return to the

song record display.

It is a good idea to set the location to a few

measures before the punch-in point specified by
From Measure. This will give you a chance to
get the feel of the section you are going to re-
record.

When the punch-out point specified by To

Measure is reached, recording will end and the
RECORD LED will go out, but playback will
continue.

176

Summary of Contents for SY-77













































































































































































































































































Reviews:

No comments

Related manuals for SY-77

Yamaha MOTIF XF Quick Start Manual preview
MOTIF XF
Brand: Yamaha Pages: 5
teenage engineering PO-32 tonic Manual preview
PO-32 tonic
Brand: teenage engineering Pages: 2
OSKITONE OKAY 2 Synth Assembly Manual preview
OKAY 2 Synth
Brand: OSKITONE Pages: 38
Waldorf MicroWave II User Manual preview
MicroWave II
Brand: Waldorf Pages: 126
Polaxis Talko User Manual preview
Talko
Brand: Polaxis Pages: 10
Waldman Kryptton User Manual preview
Kryptton
Brand: Waldman Pages: 20
Random*Source JHAIBLE Dual WASP Filter Manual preview
JHAIBLE Dual WASP Filter
Brand: Random*Source Pages: 9
Boss SY-300 Owner'S Manual And Warranty Information preview
SY-300
Brand: Boss Pages: 12
MTS Systems Electronic keyboard Instruction Manual preview
Electronic keyboard
Brand: MTS Systems Pages: 31
E-Mu Ultraproteus Operation Manual preview
Ultraproteus
Brand: E-Mu Pages: 307
Yamaha S-30 Data List preview
S-30
Brand: Yamaha Pages: 40
LeafAudio Microphonic Soundbox Quickstart Manual, Safety Instructions, Warranty preview
Microphonic Soundbox
Brand: LeafAudio Pages: 2
Gotharman Gotharman's anAmoNo-box User Manual preview
Gotharman's anAmoNo-box
Brand: Gotharman Pages: 9
Gotharman SpazeDrum Black Update Manual preview
SpazeDrum Black
Brand: Gotharman Pages: 11
Gotharman Gotharman's SpazeDrum Update Manual preview
Gotharman's SpazeDrum
Brand: Gotharman Pages: 14
Gotharman PolySpaze Manual preview
PolySpaze
Brand: Gotharman Pages: 20
Gotharman deFormer Manual preview
deFormer
Brand: Gotharman Pages: 73
Gotharman deMOON User Manual preview
deMOON
Brand: Gotharman Pages: 38

Brands by name

Popular brands

Load more brands