Yamaha SY-77, Operating Manual

Page: 179 / 268

MULTI EDIT MODE
This function sets all multi data values to the mini-
mum or simplest possible setting. When you are
creating a new multi it is often convenient to start
with the initial settings.
If you are sure you want to initialize the multi
data, press YES and the data of the multi being
edited will be set to the values shown below. If you
decide not to initialize, press NO.
Initialized settings for Multi data
01 Voice select
Preset 1 A0l(0l) GrandPiano (all channels)
02 Voice volume
Volume =127 (maximum) (all channels)
03 Voice tuning
Tuning = ±0 (all channels)
04 Voice note shift
Note Shift = ±0 (all channels)
05 Voice static pan
Pan = ±0 (= center) (all channels)
06 Voice output group select
Output = both (all channels)
07 Effect set
*** same as for normal voice ***
08 Name multi
Name = INIT MULTI VOICE
16. Recall multi
Summary: The previously edited Multi data can be
recalled for additional editing.
Procedure:
From: multi job directory (JUMP #400)
Select: job 16:Recall
To execute: the recall operation press YES.
To quit: without executing press NO or EXIT.
If after editing a multi you exit multi edit mode with-
out storing, the edited multi data will be lost. In
such cases, you can use this function to recall the
previously edited multi data into the editing buffer.
If you are sure you want to recall, press YES and
the previously edited multi data will be recalled into
the editing buffer. If you decide not to recall, press
NO.
167