MULTI EDIT MODE
Voice Static Pan (VC or -31...+31 =
left...right): Set the static pan position for each
voice played by the sixteen channels of the
multi. The static pan setting for each voice is
displayed as a horizontal bar graph.
It is also possible to select "VC", when the
voice will use its own pan data. If "VC" is not
selected, the pan data of the voice will be
ignored and the static pan setting you specify
here will be used. If "VC" is not selected for a
drum voice, all the drum sounds will be panned
to the same pan position -31...+31 you specify
here.
Holding SHIFT and pressing F1-F8 will move the
cursor to voices 1-8 or to voices 9-16, depend-
ing on whether F1 or F2 has been pressed.
6. Voice output group select
Summary: Each voice can be sent from either or
both output groups, to determine how the voice
will be processed through the effect units.
Procedure:
From: multi job directory (JUMP #400)
Select: job 06:OutSel
Specify: the output group for each channel
for channels 1-8 press (JUMP #410)
Fl (1-8)
for channels 9-16 press (JUMP #411)
F2 (9-16)
Multi edit settings cannot determine the
output group for a multi channel that plays a
drum voice, and the cursor cannot be moved to
these voices. The display will show
"Output = drum", and the drum voice data will
determine which output group is used by each
drum sound. Refer to Drum set data, 2. Wave
data set (JUMP #274).
Holding SHIFT and pressing P1-F8 will move the
cursor to voices 1-8 or to voices 9-16, depend-
ing on whether Fl or F2 has been pressed.
Selected Voice: This displays the number and
name of the voice played by the multi channel
where the cursor is located.
Output (off, grp1, grp2, both): Each voice played
by a multi is independently panned according to
the setting of 5. Voice static pan, and this stereo
output of each voice is sent to the DSP effects
unit via Output Group 1 or 2. The output group
setting of the voice itself will be ignored unless
this is set "off".
Output: The selected Output Group(s) will deter-
mine how the voice is processed by the effect
units as you specify in 7. Effect set. If the output
group is "Off" the voice will not be processed
through the effect units. The unprocessed sound
of the voice will be heard if the Stereo Mix of the
effect unit is turned on.
Channel
1
2
3
1 6
Voice
P1 - C03 BigBand
P1 - D 1 0
Thumb Bass
P1 - A01
GrandPiano
P1 -C15 Clarinet
Static
Pan
-15
VOICE
+31
+04
Output
Select
both
1
2
2
7. Effect set
#412
Summary: The four effects in the effect unit can be
arranged in various ways to add modulation and
reverb to the sound.
Procedure:
From: multi job directory (JUMP #400)
Select: job 07:Effect (JUMP #412)
165
Summary of Contents for SY-77
