manualshive.com logo in svg

Yamaha RS7000 Ver.1.2, Owner'S Manual

Introducing the Yamaha RS7000 Ver.1.2 Addendum! Enhance your music production experience with this versatile device. To make the most of its capabilities, we offer a free downloadable manual, exclusively available at manualshive.com. Elevate your creativity now with the Yamaha RS7000 Ver.1.2 and unlock its full potential with our user-friendly manual.

Share
Download
background image

Preparation and Setup

22

RS7000

Power supply and other equipment connections will be described in this section.

Power Connection

Connect the supplied power cord to the AC inlet on the rear
panel. Then plug the other end of the cord into a 3-prong wall
outlet.

Connecting to Audio Equipment

The RS7000 has no internal amplifier or speakers of its own. To
monitor the sound of the RS7000, connect headphones, powered
speakers, or other playback equipment as required.

■

Headphones

If you are using headphones, connect them to the rear panel
PHONES (headphones) jack. When using headphones, adjust the
MASTER VOLUME control to an appropriate level that will not
harm your hearing. The rear-panel OUTPUT L/MONO and R
jacks are active even when headphones are connected.

■

Powered Speakers

Connect a pair of powered speakers (such as the Yamaha CBX-
S3) to the output jacks (L/MONO, R) using appropriate connec-
tion cables. If you are connecting only one powered speaker, use
the L/MONO jack.

Preparation and Setup

WARNING

• Be sure that the RS7000’s power switch is OFF

before you connect the cord. 

• Make sure your RS7000 is rated for the AC voltage

supplied in the area in which it is to be used (as
listed on the rear panel). Connecting the unit to the
wrong AC supply can cause serious damage to the
internal circuitry and may even pose a shock haz-
ard!

• Use only the AC power cord supplied with the

RS7000. If the supplied cord is lost or damaged and
needs to be replaced, contact your Yamaha dealer.
The use of an inappropriate replacement can pose a
fire and shock hazard!

• The type of AC power cord provided with the

RS7000 may be different depending on the country
in which it is purchased (a third prong may be pro-
vided for grounding purposes). Improper connection
of the grounding conductor can create the risk of
electrical shock. Do NOT modify the plug provided
with the RS7000. If the plug will not fit the outlet,
have a proper outlet installed by a qualified electri-
cian. Do not use a plug adaptor which defeats the
grounding conductor.

• The RS7000 is designed for use with a grounded

line (three-prong outlet). The power cord includes a
grounding pin to prevent electrical shock and dam-
age to equipment. 

MODEL

SER. NO.

M

AC  INLET

CAUTION

Connections with external equipment must be made
with the power of the RS7000 and peripheral equip-
ment turned off. Making connections with the power
on may damage your amp or speakers.

R

R

INPUT

OUTPUT

L

L/MONO

PHONES

     THAT MAY CAUSE UNDESIRED OPERATION.

SW

CONTRAST

R

R

INPUT

OUTPUT

L

L/MONO

PHONES

Summary of Contents for RS7000 Ver.1.2

































































































































































































































































































































































Reviews:

No comments

Related manuals for RS7000 Ver.1.2

ABB E-Hub 2.0 Getting Started preview
E-Hub 2.0
Brand: ABB Pages: 18
R-Tech X5 Quick Manual preview
X5
Brand: R-Tech Pages: 3
Gardena 1407 Operator'S Manual preview
1407
Brand: Gardena Pages: 13
Raymarine i70 Installation & Operation Instructions preview
i70
Brand: Raymarine Pages: 90
Abbott CentriMag Quick Reference Manual preview
CentriMag
Brand: Abbott Pages: 2
Abbott FreeStyle Libre Software Update preview
FreeStyle Libre
Brand: Abbott Pages: 3
abc PHASER Operation And Maintenance Manual preview
PHASER
Brand: abc Pages: 8
Olsen Sprint Quick Operation Manual preview
Sprint
Brand: Olsen Pages: 4
Falcon Dominator Series User, Installation And Servicing Instructions preview
Dominator Series
Brand: Falcon Pages: 31
Fakir HYPO CLEAN Fast User Manual preview
HYPO CLEAN
Brand: Fakir Pages: 22
Gardol GLVE 1400-34 Original Operating Instructions preview
GLVE 1400-34
Brand: Gardol Pages: 260
York Fitness 60091 Owner'S Manual preview
60091
Brand: York Fitness Pages: 20
IDEAL Networks LanTEK IV User Manua preview
LanTEK IV
Brand: IDEAL Networks Pages: 60
IceCure IceSense3 User Manual preview
IceSense3
Brand: IceCure Pages: 104
jablotron JA-65ST Quick Start Manual preview
JA-65ST
Brand: jablotron Pages: 2
Qlight SK Quick Start Manual preview
SK
Brand: Qlight Pages: 4
PacBio Sequel Safety Manual preview
Sequel
Brand: PacBio Pages: 13
Pablo BELMONT Assembly/Installation Instructions preview
BELMONT
Brand: Pablo Pages: 4

Brands by name

Popular brands

Load more brands