Yamaha RS7000 Ver.1.2, Owner'S Manual

Page: 245 / 352

4. The Sample Jobs
RS7000 245
5
The Sampling Mode
■
Select a Job
3.
Use [Knob 1] (CATEGORY) and [Knob 2] (JOB) to move
the cursor to the desired job.
4. Press [F4] (SELECT) to go to the selected job page.
■
Executing Jobs 01 (COPY) ~ 04 (MOVE)
5. Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the
target sample. Press [F2] (AUDITION) to audition the
selected sample.
6. For the COPY and MOVE jobs use [Knob 3] (SAMPLE) and
[Knob 4] (TYPE) to select the destination sample.
7.
Press [F4] (DO!) to execute the job.
8.
Press [EXIT] 4 times to return to the original display page.
■
Executing Jobs 05 (NORMALIZE) ~ 11 (LOOP REMIX)
5.
Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the
target sample. Press [F2] (AUDITION) to audition the
selected sample.
6.
Use [Knob 3] and [Knob 4] to set the job parameters as
required.
7. Press [F4] (DO!) to execute the job. Press [F2] (AUDITION)
to audition the processed sample.
8.
If the results aren’t satisfactory you can re-adjust the parame-
ters using [Knob 3] and [Knob 4] and then press [F4] (DO!)
again to re-execute the job.
9.
Press [F3] (CREATE) to actually save the processed sample
to the target sample number, overwriting the original sample.
If the original sample is a Pitched Sample it will be overwrit-
ten at this point. If the original sample is part of a Sample Kit
Voice a key-number selection page will appear in which
[Knob 2] can be used to select the key number. Pressing [F3]
(OK) then overwrites the sample.
10.
Press [EXIT] 4 times to return to the original display page.
Copies the specified sample to a different sample number.
When the target is a Sample Kit Voice, samples assigned to each
key number can be copied individually.
1 SAMPLE (Source Sample Number)
.......... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the source sample voice.
2 KEY (Source Key Number)
........................... [Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the source sample.
3 SAMPLE
(Destination Sample Number)
.................... [Knob 3]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the destination sample voice.
4 TYPE (Destination Type)
............................... [Knob 4]
[Settings] PITCHED, KIT: C-2 ~ G8
Specifies the type of the destination sample voice.
Selects the sample key number when the destination sample
is a Sample Kit Voice type.
5
AUDITION
...................................................................... [F2]
Plays the specified copy source sample.
6
DO!
................................................................................... [F4]
Executes the job.
NOTE
When the DELETE or other job has been used
to delete a sample voice assigned to the cur-
rently selected track, pressing [EXIT] will skip
the Sample Edit page and return to the original
page.
01 COPY
NOTE
This parameter is not available when the speci-
fied source sample is a Pitched Voice.
NOTE
The PITCHED option is not available when a
Sample Kit Voice is stored in the destination
sample voice number.
3 4 6 1 2
5
[Knob 1] [Knob 2]
[Knob 3]
[Knob 4]
[F2]
[F4]