Yamaha RS7000 Ver.1.2 Owner'S Manual Download Page 342

Page: 342 / 352

342

RS7000

12. Glossary

Velocity

A numerical value indicating the speed (force) with

which a note was played.

Voice

A sound that is built into the tone generator that can be

selected and played.

Voice Bank

Voices are organized into voice banks which can be

selected by using MIDI bank select MSB and LSB data.

Wah Effect

An effect that cyclically modulates the tone. The

RS7000 produces this effect by using an LFO signal to

modulate the cutoff frequency of a filter. Wah effects are

included in the Variation effect stage.

Wave

A digitally recorded instrument waveform.

Wet Sound

The audio signal that is processed by an effect. Nor-

mally when using an effect, not all of the audio signal is

passed through the effect. Rather, the degree of the

effect is adjusted by mixing the sound that passes

through the effect (the wet sound) with the sound that

bypasses the effect (the dry sound).

Summary of Contents for RS7000 Ver.1.2

































































































































































































































































































































































Search results

Summary of Contents for RS7000 Ver.1.2

Reviews:

Related manuals for RS7000 Ver.1.2

Brands by name

Popular brands

Yamaha RS7000 Ver.1.2, Owner'S Manual

Search results

Summary of Contents for RS7000 Ver.1.2

Reviews:

Related manuals for RS7000 Ver.1.2

Brands by name

Popular brands