manualshive.com logo in svg

Yamaha RS7000 Ver.1.2, Owner'S Manual

Introducing the Yamaha RS7000 Ver.1.2 Addendum! Enhance your music production experience with this versatile device. To make the most of its capabilities, we offer a free downloadable manual, exclusively available at manualshive.com. Elevate your creativity now with the Yamaha RS7000 Ver.1.2 and unlock its full potential with our user-friendly manual.

Share
Download
background image

 

RS7000

3

 

PRECAUTIONS

 

PLEASE READ CAREFULLY BEFORE PROCEEDING

 

* Please keep this manual in a safe place for future reference.

 

 WARNING

 

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from 
electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited 
to, the following:

 

• Only use the voltage specified as correct for the instrument. The required 

voltage is printed on the name plate of the instrument.

• Check the electric plug periodically and remove any dirt or dust which may 

have accumulated on it.

• Use only the supplied power cord/plug.

• Do not place the power cord near heat sources such as heaters or radiators, 

and do not excessively bend or otherwise damage the cord, place heavy 
objects on it, or place it in a position where anyone could walk on, trip over, 
or roll anything over it.

• This instrument contains no user-serviceable parts. Do not attempt to 

disassemble or modify the internal components in any way.

• Do not expose the instrument to rain, use it near water or in damp or wet 

conditions, or place containers on it containing liquids which might spill into 
any openings.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. 

A burning item may fall over and cause a fire.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden 

loss of sound during use of the instrument, or if any unusual smells or 
smoke should appear to be caused by it, immediately turn off the power 
switch, disconnect the electric plug from the outlet, and have the instrument 
inspected by qualified Yamaha service personnel.

 

 CAUTION

 

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or 
damage to the instrument or other property. These precautions include, but are not limited to, the following:

 

• Always connect the three-pin attachment plug to a properly grounded power 

source. (For more information about the main power supply, see page 22.) 

• When removing the electric plug from the instrument or an outlet, always 

hold the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be 

used for extended periods of time, or during electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly cause 
overheating in the outlet.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold 

or heat (such as in direct sunlight, near a heater, or in a car during the day) to 
prevent the possibility of panel disfiguration or damage to the internal 
components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, 

mobile phone, or other electric devices. Otherwise, the instrument, TV, or 
radio may generate noise.

• Do not place the instrument in an unstable position where it might 

accidentally fall over.

• Before moving the instrument, remove all connected cables.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Location

 

(2)-8

1/2

Summary of Contents for RS7000 Ver.1.2

































































































































































































































































































































































Reviews:

No comments

Related manuals for RS7000 Ver.1.2

Keithley 3330 Operator'S Manual preview
3330
Brand: Keithley Pages: 149
Odom ES3 Hardware Configuration preview
ES3
Brand: Odom Pages: 19
MacDon M205 Installation Instructions Manual preview
M205
Brand: MacDon Pages: 30
GE Vivid E9 Service Manual preview
Vivid E9
Brand: GE Pages: 802
iET SRL Series Operation Manual preview
SRL Series
Brand: iET Pages: 17
Hakko Electronics 192 Instruction Manual preview
192
Brand: Hakko Electronics Pages: 8
Hailo Professional HS 8 Assembly And Operation preview
Professional HS 8
Brand: Hailo Pages: 5
Hainbuch TESTit Installation Manual preview
TESTit
Brand: Hainbuch Pages: 52
MacDon R113 Quick Card User Manual preview
R113
Brand: MacDon Pages: 2
Yamaha mLAN16E Software Manual preview
mLAN16E
Brand: Yamaha Pages: 126
Yamaha DM 2000 Version 2 Orientation Manual preview
DM 2000 Version 2
Brand: Yamaha Pages: 8
Goobay 49873 User Manual preview
49873
Brand: Goobay Pages: 6
ACS Alcolock L OEM Instruction Manual preview
Alcolock L OEM
Brand: ACS Pages: 28
ParaBody Serious Steel 805106 Assembly Instructions Manual preview
Serious Steel 805106
Brand: ParaBody Pages: 6
Jäger Z33-D060.02 S2A Manual preview
Z33-D060.02 S2A
Brand: Jäger Pages: 36
KingsBox Royal Squat Rack SX-5 II Manual preview
Royal Squat Rack SX-5 II
Brand: KingsBox Pages: 5
TOPMAQ PHD50 Instructions Manual preview
PHD50
Brand: TOPMAQ Pages: 13
V&P Scientific SpinVessel 650ml Operating Instructions Manual preview
SpinVessel 650ml
Brand: V&P Scientific Pages: 9

Brands by name

Popular brands

Load more brands