Yamaha RS7000 Ver.1.2 Owner'S Manual Download Page 114 | Manualshive

Page: 114 / 352

background image

12. Saving to Memory Card or Disk

114

RS7000

The SAVE sub-mode allows you save and load data to or from standard memory cards — available at
many electronics and computer stores — or SCSI disks.
5 display pages are provided: Save, Export, Rename, Delete, and Format.
Press [SAVE] from the PATTERN Play or Patch mode to go to the SAVE sub mode. The SAVE sub mode
cannot be selected, however, during pattern playback or recording.

Handling the Memory Card

(SmartMedia

TM

*)

Be sure to handle Memory Cards with care. Follow the important
precautions below.

●

Compatible Memory Card Type

3.3V(3V) Memory Cards can be used. 5V type Memory Cards
are not compatible with this instrument.
A blank 8MB Memory Card has been included in your instru-
ment.
* SmartMedia is a trademark of Toshiba Corporation.

●

Memory Capacity

There are five types of Memory Cards: 2MB/4MB/8MB/16MB/
32MB. A Memory Card with the memory capacity exceeding
32MB can also be used if it conforms to the standards of SSFDC
(Solid State Memory Card: another name of SmartMedia) Forum.

●

Inserting/Removing Memory Cards

To insert a Memory Card:

Hold the Memory Card so that the connector section (gold) of the
Memory Card is facing downward and forward, towards the
Memory Card slot. Carefully insert the Memory Card into the
slot, slowly pushing it all the way in until it is fitted in place.
* Don’t insert the Memory Card in wrong direction.
* Don’t insert anything other than a Memory Card in the slot.

To remove a Memory Card:

Before removing the Memory Card, be sure to confirm that the
Memory Card is not in use (see the following note), or it is not
being accessed by the instrument. Then pull the Memory Card
out slowly by hand.

Formatting Memory Cards

Before using a Memory Card with your instrument it must first be
formatted. Once it is formatted all data on it will be erased. Be
sure to check if the data is unnecessary for you or not, before-
hand.

12. Saving to Memory Card or Disk

NOTE

*"During access" includes save, load, format,
delete, and directory creation operations. Also,
be aware that the instrument will automatically
access the Memory Card to check the media
type when it is inserted while the instrument is
turned on.

CAUTION

Never attempt to remove the Memory Card or
turn the power off during accessing. Doing so
can damage the data on the instrument/Mem-
ory Card and possibly the Memory Card itself.

CAUTION

The supplied memory card contains style data
when initially shipped. Use a separate memory
card or save the style data to an external SCSI
disk if you want to keep this style data.

NOTE

* The Memory Cards formatted with this instru-
ment may become unusable with other instru-
ments.

«
...
112
113
114
115
116
...
»

Summary of Contents for RS7000 Ver.1.2

































































































































































































































































































































































Reviews:

No comments

Related manuals for RS7000 Ver.1.2

Brand: Rangevision Pages: 31

Brand: Laica Pages: 4

Brand: Parata Pages: 40

Brand: parr Pages: 20

Brand: Landoll Pages: 71

Brand: York Fitness Pages: 4

Brand: W&H Pages: 23

Brand: Bartscher Pages: 24

Brand: Panasonic Pages: 174

Brand: Cameo Pages: 64

Brand: Cameo Pages: 100

Brand: CAME Pages: 32

Brand: Nektar Pages: 3

Brand: Youkey Pages: 86

Brand: Wacker Neuson Pages: 62

Brand: Faderfox Pages: 8

Brand: ICELED Pages: 4

Brand: Facom Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands