manualshive.com logo in svg

Yamaha RS7000 Ver.1.2, Owner'S Manual

Introducing the Yamaha RS7000 Ver.1.2 Addendum! Enhance your music production experience with this versatile device. To make the most of its capabilities, we offer a free downloadable manual, exclusively available at manualshive.com. Elevate your creativity now with the Yamaha RS7000 Ver.1.2 and unlock its full potential with our user-friendly manual.

Share
Download
background image

1. Sequential Pattern Playback (Pattern Chain Play)

160

RS7000

5

Style Name

[Settings]

Style Number

OFF, 01 ~ 64, END

Section

A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, 

P

Style Name

Display only.

Displays the currently-playing style and section. Also allow
the style and section to be temporarily changed.
If further style or section changes are record in the chain,
however, those changes will take priority.
The STYLE parameter can be set to OFF to create breaks
(blank sections) in the chain (the chain continues playing).
When STYLE is set to END, playback will stop at that point.
Press [F2] to move the cursor and use [Knob 2] to set the sec-
tion.

6

MEAS
(Measure)

..... [Knob 3], [SHIFT]+[F3] 

→

 Numeric Keypad

[Settings] 001 ~ 999

Displays the current measure number. Can also be used to
change the current measure number.

7

BPM

................ [Knob 4], [SHIFT]+[F4] 

→ 

Numeric Keypad

[Settings] 001.0 

~

 300.0 (BPM)

Sets the pattern chain playback tempo.
Use [Knob 4] to adjust the BPM in steps of 1, or press [F4] to
move the cursor to the right of the decimal point and use
[Knob 4] to adjust in steps of 0.1.

8

OCT (Octave)

[Settings] -5 octaves ~ +5 octaves

Shows the current octave setting of the keyboard.
Each “

” on the display corresponds to one octave down,

and each “

” corresponds to one octave up.

The keyboard octave can be changed by pressing the [KEY-
BOARD] button so that its indicator lights, and then using the
[OCT DOWN] and [OCT UP] buttons to set the octave.
Press the [OCT DOWN] and [OCT UP] buttons simulta-
neously to restore the normal keyboard octave settings (no
octave shift).

9

Transpose

[Settings] -36 

~

 0 

~

 +36 (semitones)

Transposes the pitch of pattern chain playback.
Transposition is set in semitone increments. A setting of “12”
transposes by one octave.

[Procedure]

The transpose procedure is the same as in the PATTERN
mode (Page 73).

0

Track

Shows the track numbers, and indicates whether the corre-
sponding track contains data, as well as the mute or solo sta-
tus of the track. The three track types available in the
PATTERN CHAIN mode (PATT, SCENE, and BPM) as
well as the tracks included in the currently selected pattern (1
~ 16) are shown.

: The track contains sequence data. 
: The track is muted (no sound will be produced by this

track). (TR01 ~ TR16)

: The track is empty (TR01 ~ TR16).
: The track is empty (PATTERN, SCENE/MUTE, BPM).

[Track selection procedure]

With the difference that you can select BPM track, Scene/
Mute track, or Pattern track, the procedure for selecting a
track is the same as when selecting a Patterne track. The
BPM track and Scene/Mute track can be selected by holding
down [TRACK SELECT] and pressing [TR-]/[TR+].
The name or number of the selected track will be displayed in
inverse video (black).

[Mute & Solo Setting Procedure]

The mute and solo setting procedure is the same as in the PAT-
TEN mode (Page 74).

NOTE

• Refer to “Chapter 1: Basics”, page 51, for

more information on styles and sections.

• Sections can be changed by pressing the

[KEYBOARD] button so that its indicator goes
off, and then pressing the black key on the
keyboard corresponding to the desired sec-
tion. (Page 72)

NOTE

• The [

]/[

]/[

] buttons can also be used

to move from measure to measure (also dur-
ing playback).

• Press [STOP] while holding [SHIFT] to set the

current measure as the jump location (the
measure to which the song position will jump
when playback is stopped). The jump setting
can be cancelled by pressing [

] or [

]

while holding [SHIFT].

NOTE

BPM can also be set by using the [TAP] button
(Page 68).

Summary of Contents for RS7000 Ver.1.2

































































































































































































































































































































































Reviews:

No comments

Related manuals for RS7000 Ver.1.2

B&K 700 Calibration Manual preview
700
Brand: B&K Pages: 5
B&K 1621 Instruction Manual preview
1621
Brand: B&K Pages: 28
Varec 6700 Installation And Operation Instructions Manual preview
6700
Brand: Varec Pages: 74
Halyard MIC Series Instructions For Use Manual preview
MIC Series
Brand: Halyard Pages: 84
PAIDI Twist Instructions For Use Manual preview
Twist
Brand: PAIDI Pages: 48
Makita EM2650LH Instruction Manual preview
EM2650LH
Brand: Makita Pages: 84
Panasonic AJSPD850P - P2 DECK Operating Instructions Manual preview
AJSPD850P - P2 DECK
Brand: Panasonic Pages: 73
Gatekeeper ITSS Installation Manual preview
ITSS
Brand: Gatekeeper Pages: 8
Gate Bure Rise & Go DB 56-309 Technical Manual preview
Bure Rise & Go DB 56-309
Brand: Gate Pages: 8
Taurus HS 100 Assembly Instructions Manual preview
HS 100
Brand: Taurus Pages: 24
Tactile Medical AFFLOVEST Instructions For Use Manual preview
AFFLOVEST
Brand: Tactile Medical Pages: 23
Taarup 7640 Operator'S Manual preview
7640
Brand: Taarup Pages: 72
Garmin FUSION APOLLO MS-WB675 Installation Instructions Manual preview
FUSION APOLLO MS-WB675
Brand: Garmin Pages: 18
Rapid Shape RS wash Quick Start Manual preview
RS wash
Brand: Rapid Shape Pages: 12
Hanskamp MultiFill 003-561-005 Installation And Operating Instructions Manual preview
MultiFill 003-561-005
Brand: Hanskamp Pages: 20
Fillauer ALP Aluminum Product Manual preview
ALP Aluminum
Brand: Fillauer Pages: 12
Hoshizaki RM-45-SD Service Manual preview
RM-45-SD
Brand: Hoshizaki Pages: 35
lumishore EOS Mini Manual preview
EOS Mini
Brand: lumishore Pages: 13

Brands by name

Popular brands

Load more brands