manualshive.com logo in svg

Yamaha RS7000 Ver.1.2, Owner'S Manual

Introducing the Yamaha RS7000 Ver.1.2 Addendum! Enhance your music production experience with this versatile device. To make the most of its capabilities, we offer a free downloadable manual, exclusively available at manualshive.com. Elevate your creativity now with the Yamaha RS7000 Ver.1.2 and unlock its full potential with our user-friendly manual.

Share
Download
background image

4. Error Message List

288

RS7000

●

Operational Errors

●

System Errors

4. Error Message List

No Data

When a job is executed, the selected track or range contains no data. Select an 
appropriate track or range.

Illegal Input

An unacceptable input or value has been specified. Check the input method or 
value.

Illegal Track Number

An unacceptable track number has been specified. Select the track again.

Illegal Phrase Number

An unacceptable phrase number has been specified. Select the phrase again.

Illegal Measure

An unacceptable measure number has been specified. Select the measure 
again.

Illegal Check Box

No check boxes have been checked in a track job which requires a check box 
selection. Check the appropriate check box.

Meter Mismatch

The meter values of the original and edited data are different.

No F7 (End Of Exc.)

Exclusive data has been entered or changed without the necessary “End Of 
Exclusive” byte (F7). Make sure F7 is included.

Preset Phrase

You have attempted to edit or record a preset phrase. Preset phrases must be 
copied to a user phrase before they can be edited.

Pattern Length Mismatch

A job will result in the length of a phrase being greater than 256 measures.

Phrase Length Mismatch

An edit operation will result in a phrase which is longer than 256 measures.

Phrase Number Overflow

The maximum number of phrases (256) has been exceeded when recording, 
executing a job, or editing.

Too Long Sample

A sample time stretch or other job has resulted in a sample being too long.

Too Short Sample

The sample length is too short and the Frequency Convert job cannot be exe-
cuted.

Too Low Freq

The sampling frequency is too low and the Frequency Convert job cannot be 
executed.

Digital In Unlocked

The DIGITAL/OPTICAL input is unlocked. Check the connections and the out-
put from the source device.

Backup Battery Low

The internal backup battery is running low. Have the battery replaced by your 
YAMAHA dealer or an authorized YAMAHA service center.

Sequence Memory Full

The internal memory is full and recording, editing, job execution, MIDI recep-
tion/transmission, or loading from card or disk cannot continue. Try again after 
erasing unwanted song, pattern, or user phrase data.

Sample Number Overflow

A sampling operation, job, or load operation has exceeded the maximum 
allowable number of samples. Try again after erasing unnecessary samples.

Too Many Local Voices

The maximum number of samples allowable for a pattern or song (128) has 
been exceeded.

Too Many Common Voices

The maximum allowable number of common sample voices (128) has been 
exceeded.

Too Many Sample Voices

The maximum overall number of sample voices (256) has been exceeded.

Wave Memory Full

The wave memory is full and further sampling operations, jobs, or load opera-
tions cannot be executed. In some cases, the amount of remaining memory will 
be increased when you execute the Wave Memory Optimize operation.

Factory Set

This message appears when the RS7000 is restored to the initial factory set-
tings (Page 25). The data in internal memory can be corrupted when the backup 
battery voltage runs too low, for example, and all data will automatically be 
restored to the factory settings, causing this message to appear.

Summary of Contents for RS7000 Ver.1.2

































































































































































































































































































































































Reviews:

No comments

Related manuals for RS7000 Ver.1.2

Ecco 200 Series Installation & Operating Instructions preview
200 Series
Brand: Ecco Pages: 4
JD Squared 3 Assembly & Operating Instructions preview
3
Brand: JD Squared Pages: 15
DAPAudio D1256 Manual preview
D1256
Brand: DAPAudio Pages: 16
3M 400 Series User Instructions preview
400 Series
Brand: 3M Pages: 28
Jacobsen 600 Series Mounting Instructions preview
600 Series
Brand: Jacobsen Pages: 6
Parker 6513 Technical Manual preview
6513
Brand: Parker Pages: 54
Yardistry G005 Installation Manual preview
G005
Brand: Yardistry Pages: 9
Haigh Quattro Operating & Maintenance Manual preview
Quattro
Brand: Haigh Pages: 60
Bang & Olufsen BeoPlay A9 Quick Manual preview
BeoPlay A9
Brand: Bang & Olufsen Pages: 2
Raven CR7 Update Manual preview
CR7
Brand: Raven Pages: 17
Campbell SC932A Product Manual preview
SC932A
Brand: Campbell Pages: 12
Garmin GSD20 Sounder Installation Manual preview
GSD20 Sounder
Brand: Garmin Pages: 12
Garmin GC 12 Installation Instructions Manual preview
GC 12
Brand: Garmin Pages: 13
SAMCHULLY HCH Instruction Manual preview
HCH
Brand: SAMCHULLY Pages: 48
HAGS Merryl Manual preview
Merryl
Brand: HAGS Pages: 5
HAGER WERKEN SPEEDO-CLEAN Instructions For Use preview
SPEEDO-CLEAN
Brand: HAGER WERKEN Pages: 2
LANGER EMV-Technik P1401 User Manual preview
P1401
Brand: LANGER EMV-Technik Pages: 25
Lang Electric Clamshell CSE12-208VCD Installation, Operation And Maintenance Instructions preview
Electric Clamshell CSE12-208VCD
Brand: Lang Pages: 16

Brands by name

Popular brands

Load more brands