RM1x SEQUENCE REMIXER
41
BASIC CONCEPT
• Variation = System
When Variation connection is set to System, the three ef-
fects will be connected as shown in the diagram below.
part 1
VARIATION
REVERB
send chorus to reverb
send variation to chorus
send variation to reverb
DRY LINE
PAN
reverb
return
reverb
pan
OUTPUT
thick line indicates a stereo signal
CHORUS
part 2
part 3
part 16
chorus
return
chorus
pan
variation
return
variation
pan
var send
var send
var send
rev send
rev send
rev send
cho send
cho send
cho send
dry level
dry level
dry level
dry level
var send
rev send
cho send
PAN
PAN
PAN
volume
expression
PAN
volume
expression
PAN
volume
expression
PAN
volume
expression
6. Effect block
The signals from all tone generator parts will be sent to
the reverb effect, chorus effect, and variation effect ac-
cording to the Voice submode settings Reverb Send Level
(pages 64, 120), Chorus Send Level (pages 64, 120), and
Variation Send Level (pages 64, 120). Here you can adjust
the effect depth for each part.
The stereo location of the effect output is determined by
the Effect submode settings Reverb Pan (pages 72, 121),
Chorus Pan (pages 71, 121), and Variation Pan (pages 70,
121).
If Variation connection = System, three bus lines will be
connected. Send Chorus To Reverb (pages 71, 121) is a
bus line that connects the Chorus Effect to the Reverb Ef-
fect. Send Variation To Chorus (pages 70, 121) is a bus
line that connects the Variation Effect to the Chorus Ef-
fect. Send Variation To Reverb (pages 70, 121) is a bus
line that connects the Variation Effect to the Reverb Ef-
fect. By using these three bus lines, you can use the effects
in a variety of ways, such as connecting the three effects
in series, or dividing them.
