Yamaha HTR-2067 Owner'S Manual Download Page 61 | Manualshive

Page: 61 / 68

background image

APPENDIX

➤

Information on HDMI

En

61

Audio Return Channel (ARC)

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.

Check the following after the HDMI Control settings.

1

Select a TV program with the TV remote control.

2

Check that the input source of the unit will be automatically switched
to “AUDIO 4” and the TV audio will be played back on the unit.

If you cannot hear the TV audio, check the following:

– “ARC” (p.43) in the “Setup” menu is set to “On”.

– The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack

marked “ARC”) on the TV.

Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.

• If the audio is interrupted while using ARC, set “ARC” (p.43) in the “Setup” menu to “Off” and use a digital

optical cable to input TV audio to the unit (p.17).

• When using ARC, connect a TV with an HDMI cable that supports ARC.

• “AUDIO 4” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 4

jacks, use “TV Audio Input” (p.43) in the “Setup” menu to change the TV audio input assignment. To use the
SCENE function (p.25), you also need to change the input assignment for SCENE (TV).

HDMI signal compatibility

Audio signals

Video signals

The unit is compatible with the video signals of the following resolutions:

• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending

on the type of the DVD player.

• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction

manual for each device.

• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device

outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.

Audio signal type

Audio signal format

Compatible media (example)

2ch Linear PCM

2ch, 32 to 192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio

Multichannel Linear PCM

8ch, 32 to 192 kHz, 16/20/24 bit

DVD-Audio, BD (Blu-ray disc),
HD DVD

DSD

2 to 5.1ch, 2.8224 MHz, 1 bit

SACD

Bitstream

Dolby Digital, DTS

DVD-Video

Bitstream
(High definition audio)

Dolby Digital Plus

BD (Blu-ray disc), HD DVD

• 480i/60 Hz

• 720p/60 Hz, 50 Hz

• 576i/50 Hz

• 1080i/60 Hz, 50 Hz

• 480p/60 Hz

• 1080p/60 Hz, 50 Hz, 24 Hz

• 576p/50 Hz

• 4K/30 Hz, 25 Hz, 24 Hz

00_HTR-2067_om_En.book Page 61 Monday, January 27, 2014 9:33 AM

«
...
59
60
61
62
63
...
»

Summary of Contents for HTR-2067





































































Reviews:

No comments

Related manuals for HTR-2067

Brand: Omnex Pages: 16

Brand: Omnex Pages: 16

Brand: Alpine Pages: 56

Brand: Blaupunkt Pages: 43

Brand: Kathrein Pages: 21

Brand: Lathem Pages: 7

Brand: Boss Audio Systems Pages: 76

Brand: Intermatic Pages: 2

EWFS Plug receiver PL

Brand: WAREMA Pages: 6

Brand: AOR Pages: 32

LonWorks LPT-11

Brand: Echelon Pages: 76

Brand: Covid Pages: 11

Brand: AIRTRONICS Pages: 4

Brand: BFT Pages: 2

Brand: Small Wonder Labs Pages: 26

Brand: August Pages: 13

Brand: Teletek electronics Pages: 16

Brand: Lanzar Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands