Yamaha HTR-2067 Owner'S Manual Download Page 30

Page: 30 / 68

PLAYBACK

➤

Selecting the sound mode

TRANSMIT

RECEIVER

SLEEP

HDMI

AUDIO

MEMORY

PRESET

TUNING

TUNER

SOUND

INFO

MOVIE

MUSIC SUR. DECODE

ENHANCER

STRAIGHT

BASS

SCENE

RETURN

VOLUME

DVD

RADIO

DISPLAY

ENTER

SETUP

OPTION

TOP

MENU

POP-UP

MENU

MUTE

MODE

TRANSMIT

RECEIVER

SLEEP

HDMI

AUDIO

MEMORY

PRESET

TUNING

TUNER

SOUND

INFO

MOVIE

MUSIC SUR. DECODE

STRAIGHT

SCENE

RETURN

VOLUME

DVD

RADIO

DISPLAY

ENTER

SETUP

OPTION

TOP

MENU

POP-UP

MENU

MUTE

MODE

ENHANCER

Enhancing the bass (Extra Bass)

Extra Bass allows you to enjoy enhanced bass sounds, regardless
of the size of the front speakers and the presence or absence of the

subwoofer.

Press BASS.

Each time you press the key, Extra Bass is enabled or
disabled.

• You can also use “Extra Bass” (p.41) in the “Setup” menu to enable/disable

Extra Bass.

Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)

Compressed Music Enhancer adds depth and breadth to the
sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along
with any other sound modes.

Press ENHANCER.

Each time you press the key, Compressed Music Enhancer
is enabled or disabled.

• Compressed Music Enhancer does not work on the following audio sources.

– Signals whose sampling rate is over 48 kHz

– High-definition streaming audio

• You can also use “Enhancer” (p.35) in the “Option” menu to enable/disable

Compressed Music Enhancer.

MUTE

STEREO TUNED

SLEEP

OUT

ECO

CHARGE

ADAPTIVE DRC

VIRTUAL

Enhancer On

VOL.

ENHANCER

“ENHANCER” lights up

00_HTR-2067_om_En.book Page 30 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands