Yamaha HTR-2067 Owner'S Manual Download Page 43

Page: 43 / 68

CONFIGURATIONS

➤

Configuring various functions (Setup menu)

HDMI

Configures the HDMI settings.

• Default settings are underlined.

■

Configuration

Enables/disables HDMI Control (p.59).

Settings

• To use HDMI control, you need to perform the HDMI Control link setup (p.59) after connecting HDMI

Control-compatible devices.

Selects a device to output audio.

• This setting is available only when “HDMI Control” is set to “Off”.

Amp

Enables/disables the audio output from the speakers connected to the unit.

Settings

HDMI OUT (TV)

Enables/disables the audio output from a TV connected to the HDMI OUT jack.

Settings

Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.

Settings

AUDIO 1–5

Default

AUDIO 4

• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for

connecting an external device because the input will be used for TV audio input.

Select whether to use HDMI control to link the standby behavior of the TV and the
unit when “HDMI Control” is set to “On”.

Settings

Enables/disables ARC (p.17) when “HDMI Control” is set to “On”.

Settings

• You do not need to change this setting normally. In case noises are produced from the speakers

connected to the unit because TV audio signals input to the unit via ARC are not supported by the
unit, set “ARC” to “Off” and use the TV’s speakers.

HDMI Control

Off

Disables HDMI Control.

Enables HDMI Control.
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”,
and “SCENE”.

Audio Output

Off

Disables the audio output from the speakers.

Enables the audio output from the speakers.

Off

Disables the audio output from the TV.

Enables the audio output from the TV.

TV Audio Input

Standby Sync

Off

Does not set the unit to standby mode when the TV is turned off.

Sets the unit to standby mode when the TV is turned off.

Auto

Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.

ARC

Off

Disables ARC.

Enables ARC.

00_HTR-2067_om_En.book Page 43 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands