Yamaha HTR-2067 Owner'S Manual Download Page 17

Page: 17 / 68

PREPARATIONS

➤

Connecting a TV

Connect the TV to the unit with an HDMI cable and a digital optical cable.

• You do not make a digital optical cable connection between the TV and the unit in the following cases:

– If your TV supports Audio Return Channel (ARC)

– If you will receive TV broadcasts only from the set-top box

• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s

power and volume with the TV’s remote control.

To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see “Information on HDMI” (p.59).

The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices.

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit with an HDMI cable.

If you select the input source by pressing HDMI 1–4, the video/audio played back on
the video device will be output from the unit.

Connecting a TV

About Audio Return Channel (ARC)

• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a

single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.

• When using ARC, connect a TV with an HDMI cable that supports ARC.

AUDIO 1

AUDIO 2

AUDIO 3

AUDIO 5

OPTICAL

COAXIAL

( TV )

(CD)

AUDIO 4

HDMI 1

(BD/DVD)

HDMI 2

HDMI 3

HDMI OUT

ARC

HDMI OUT

ARC

HDMI

HDMI

OPTICAL

AUDIO 1

OPTICAL

( TV )

HDMI OUT jack

HDMI input

The unit (rear)

AUDIO 1 (OPTICAL) jack

Audio output

(digital optical)

Connecting playback devices

AUDIO 1

AUDIO 2

AUDIO 3

AUDIO 5

OPTICAL

COAXIAL

( TV )

(CD)

PRE OUT

SUBWOOFER

AUDIO 4

HDMI 1

(BD/DVD)

HDMI 2

HDMI 3

HDMI 4

HDMI OUT

ARC

HDMI

HDMI

HDMI 1

(BD/DVD)

HDMI 2

HDMI 3

HDMI 4

The unit (rear)

HDMI output

Video device

HDMI 1–4 jacks

1 2 3 4 5 6 7 8

00_HTR-2067_om_En.book Page 17 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands