Yamaha HTR-2067 Owner'S Manual Download Page 36

Page: 36 / 68

PLAYBACK

➤

Configuring playback settings for different playback sources (Option menu)

■

Lipsync (Lipsync)

Enables/disables the adjustment configured in “Lipsync” (p.45) in the “Setup” menu.

• This setting is applied separately to each input source.

Settings

■

Signal Info (Signal Info)

Displays information about the video/audio signal.

Choices

• To switch the information on the front display, press the cursor keys (

) repeatedly.

■

Audio In (Audio In)

Combines the video jack of the selected input source (HDMI 1–4) with an audio jack of
others. For example, use this function in the following cases.

• Connecting a playback device that supports HDMI video output, but not HDMI audio

output

Input sources

HDMI 1–4

■

Setup procedure

(To input audio through a digital optical jack)

Select “AUDIO 1” and connect the device to the unit’s corresponding audio jacks with a
digital optical cable.

(To input audio through a digital coaxial jack)

Select “AUDIO 2” or “AUDIO 3” and connect the device to the unit’s corresponding
audio jacks with a digital coaxial cable.

(To input audio through analog audio jacks)

Select “AUDIO 4” or “AUDIO 5” and connect the device to the unit’s corresponding
audio jacks with a stereo pin cable.

■

Video Out (Video Out)

Selects a video to be output with the selected audio source. For example, you can
watch the video while listening to the radio.

Input sources

AUDIO 1–5, TUNER

Settings

Off (Off)

Disables the “Lipsync” adjustment.

On (On)

Enables the “Lipsync” adjustment.

Format (FORMAT)

Audio format of the input signal

Channel (CHAN)

The number of source channels in the input signal (front/surround/
LFE)
For example, “3/2/0.1” means 3 front channels, 2 surround channels,
and LFE.

Sampling (SAMPL)

The number of samples per second of the input digital signal

Bitrate (B RATE)

The amount of data per second of the input bitstream signal

Video In (V IN)

Type and resolution of the input digital signal

Video Out (V OUT)

Type and resolution of the output digital signal

Off (Off)

Does not output video.

HDMI 1–4

Outputs video input through the corresponding video input jacks.

00_HTR-2067_om_En.book Page 36 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands