Yamaha HTR-2067 Owner'S Manual Download Page 65

Page: 65 / 68

APPENDIX

➤

Specifications

• Output Level / Output Impedance

SUBWOOFER ...........................................................1 V/1.2 k

• Headphone Jack Rated Output / Impedance

AUDIO 4 etc. (1 kHz, 50 mV, 8

) ......................100 mV/470

• Frequency Response

AUDIO 4 etc. to Front (10 Hz to 100 kHz) .................. +0/-3 dB

• Signal to Noise Ratio (IHF-A Network)

AUDIO 4 etc. (Input 1 k

Shorted, Speaker Out)

..........................................................................110 dB or more

• Residual Noise (IHF-A Network)

Front L/R (Speaker Out)......................................150 µV or less

• Channel Separation

AUDIO 4 etc. (Input 1 k

Shorted, 1 kHz/10 kHz)

................................................................. 70 dB/50 dB or more

• Volume Control

Range ............................................. MUTE, -80 dB to +16.5 dB

Step ................................................................................ 0.5 dB

• Tone Control Characteristics (Front L/R)

Bass Boost/Cut ............................. ±6 dB/0.5 dB Step at 50 Hz

Bass Turnover................................................................ 350 Hz

Treble Boost/Cut ......................... ±6 dB/0.5 dB Step at 20 kHz

Treble Turnover ............................................................. 3.5 kHz

• Filter Characteristics

(fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (Front, Center, Surround) ................................ 12 dB/oct.

L.P.F. (Subwoofer)..................................................... 24 dB/oct.

FM Section

• Tuning Range

[Canada model] .................................. 87.5 MHz to 107.9 MHz

[Asia and General models]

...................................... 87.5/87.50 MHz to 108.0/108.00 MHz

[Other models] ................................ 87.50 MHz to 108.00 MHz

• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)

Mono .................................................................2 µV (17.3 dBf)

• Signal to Noise Ratio (IHF)

Mono ............................................................................... 71 dB

Stereo .............................................................................. 70 dB

• Harmonic Distortion (IHF, 1 kHz)

Mono .................................................................................0.5%

Stereo ................................................................................0.6%

• Antenna Input................................................ 75

unbalanced

General

• Power Supply

[Canada model] .............................................. AC 120 V, 60 Hz

[General model]

...................................... AC 110 to 120/220 to 240 V, 50/60 Hz

[Australia model]............................................. AC 240 V, 50 Hz

[U.K. and Europe models] .............................. AC 230 V, 50 Hz

[Asia model].................................... AC 220 to 240 V, 50/60 Hz

• Power Consumption........................................................ 260 W

• Standby Power Consumption

HDMI Control Off

[General model] ................................................... 0.5 W or less

[Other models] ..................................................... 0.3 W or less

HDMI Control On (No Signals) .......................... 0.8 W (Typical)

• Maximum Power Consumption

[General model] .............................................................. 470 W

• Dimensions (W x H x D)

............................ 435 x 151 x 315 mm (17-1/8” x 6” x 12-3/8”)

* Including legs and protrusions

• Weight ............................................................. 7.4 kg (16.3 lbs)

* Specifications are subject to change without notice.

00_HTR-2067_om_En.book Page 65 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands