Yamaha HTR-2067 Owner'S Manual Download Page 16

Page: 16 / 68

PREPARATIONS

➤

Input/output jacks and cables

■

Video/audio jacks

❑

HDMI jacks

Transmit digital video and digital sound through a single
jack. Use an HDMI cable.

• Use a 19-pin HDMI cable with the HDMI logo. We recommend using

a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.

• The unit’s HDMI jacks support the HDMI Control, Audio Return

Channel (ARC), and 3D and 4K Ultra HD video transmission
(through output) features.

• Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.

■

Audio jacks

❑

OPTICAL jacks

Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.

❑

COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial
cable.

❑

AUDIO jacks

(Stereo L/R jacks)

Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).

Input/output jacks and cables

HDMI cable

OPTICAL

Digital optical cable

Digital coaxial cable

Stereo pin cable

1 2 3 4 5 6 7 8

00_HTR-2067_om_En.book Page 16 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands