Yamaha HTR-2067 Owner'S Manual Download Page 11

Page: 11 / 68

PREPARATIONS

➤

General setup procedure

PREPARATIONS

This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

General setup procedure

Placing speakers (p.12)

Select the speaker layout for the number of speakers that you are using and place them in your room.

Connecting speakers (p.14)

Connect the speakers to the unit.

Connecting a TV (p.17)

Connect a TV to the unit.

Connecting playback devices (p.17)

Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.

Connecting the FM antenna (p.19)

Connect the supplied FM antenna to the unit.

Connecting the power cable (p.20)

After all the connections are complete, plug in the power cable.

Selecting an on-screen menu language
(p.21)

Select the desired on-screen menu language.

Configure the speaker settings (p.22)

Configure the speaker settings of the unit to create an optimum surround sound field.

00_HTR-2067_om_En.book Page 11 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands