Yamaha HTR-2067 Owner'S Manual Download Page 46

Page: 46 / 68

CONFIGURATIONS

➤

Configuring various functions (Setup menu)

■

Volume

Configures the volume settings.

Switches the scale of the volume display.

Settings

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital
and DTS signals) playback.

Settings

Sets the maximum volume to prevent excessive loudness.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

[50.0 to 95.0 (5.0 increments), 97.0]

Sets the initial volume when the receiver is turned on.

Settings

Scale

Displays the volume in the “dB” unit.

0-97

Displays the volume in the numeric value (0.5 to 97.0).

Dynamic Range

Maximum

Produces audio without adjusting the dynamic range.

Standard

Optimizes the dynamic range for regular home use.

Min/Auto

Sets the dynamic range for clear sound even at night or at low volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.

Max Volume

Initial Volume

Off

Sets the level to the volume level of the unit when it last entered
standby mode.

Mute

Sets the unit to mute the audio output.

-80.0 dB to +16.5 dB
(0.5 dB increments)
[0.5 to 97.0
(0.5 increments)]

Sets the level to the specified volume level.

00_HTR-2067_om_En.book Page 46 Monday, January 27, 2014 9:33 AM

Summary of Contents for HTR-2067





































































Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands

Yamaha HTR-2067, Owner'S Manual

Search results

Summary of Contents for HTR-2067

Reviews:

Related manuals for HTR-2067

Brands by name

Popular brands