manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35GW, Owner'S Manual

The Yamaha GRIZZLY 350 YFM35GW is a powerful and reliable all-terrain vehicle designed to tackle any outdoor adventure. To ensure optimal performance and maintenance, it is essential to refer to the comprehensive Owner's Manual. Download your free copy of the manual from manualshive.com today and unlock the full potential of your GRIZZLY 350.

Share
Download
background image

8-31

8

3. Install the panel.

EBU24900

Checking and lubricating the cables 

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.

WARNING

EWB02130

Inspect cables frequently and replace if dam-
aged. Corrosion can result when the cable
sheaths become damaged, and cables can
also become frayed or kinked, which could re-
strict the operation of controls and lead to an
accident or injury.

EBU24911

Checking and lubricating the front and 
rear brake levers 

The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.

1. Brake light switch
2. Brake light switch adjusting nut

Recommended lubricant:

Engine oil

Recommended lubricant:

Lithium-soap-based grease (all-purpose 
grease)

U5WH63E0.book  Page 31  Monday, May 8, 2006  1:25 PM

Summary of Contents for GRIZZLY 350 YFM35GW







































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM35GW

Brands by name

Popular brands

Load more brands