Replacing the oil filter
1.
Place a rag under the oil filter, and then
remove the filter.
NOTE:
Be sure to clean up any oil spills.
2.
Apply a thin coat of the new engine oil to
the O-ring of the new oil filter.
6D45F11
3-4
9
8
7
6
5
4
3
2
1
Fuel system/Power unit
3.
Place a drain pan under the drain hole,
and then remove the drain bolt
2
and let
the oil drain completely.
NOTE:
Be sure to clean up any oil spills.
4.
Install the drain bolt, and then tighten it to
the specified torque.
5.
Pour the specified amount of the recom-
mended engine oil into the oil filler hole.
6.
Install the oil filler cap and dipstick, and
then start the engine and warm it up for 5
minutes.
7.
Turn the engine off, and then check the
oil level and correct it if necessary.
6D430050
2
Drain bolt:
27 N·m (2.7 kgf·m, 20 ft·lb)
Recommended engine oil:
4-stroke outboard motor oil
API: SE, SF, SG, SH or SJ
SAE: 10W-30 or 10W-40
Oil quantity:
(without oil filter replacement)
1.0 L (1.06 US qt, 0.88 Imp qt)
6D430060
6D430070
E
Oil filter wrench:
90890-01426
6D45F11-03 03.10.9 20:43 Page 5
