IMPORTANT INFORMATION
1-3
1
2
3
4
5
6
7
8
9
10
GEN
E
RAL I
N
FOR
M
A
T
ION
• Contact surfaces of moving parts should be oiled when
reassembled.
• Make sure that the parts, move smoothly after each sec-
tion of the machine is assembled.
ALL REPLACEMENT PARTS
We recommend the use of genuine Yamaha parts for all
replacements. Use oil and/or grease, recommended by
Yamaha, for assembly and adjustment.
GASKETS, OIL SEALS, AND O-RINGS
1.
All gaskets, seals, and O-rings should be replaced
when an engine is overhauled. All gaskets surfaces,
oil seal lips, and O-rings must be cleaned.
2.
Properly oil all mating parts and bearings during reas-
sembly. Apply grease to the oil seal lips.
BEARINGS AND OIL SEALS
Install the bearing(s) “1” and oil seal(s) “2” with their manu-
facture’s marks or numbers facing outward. (In other
words, the stamped letters must be on the side exposed to
view.) When installing oil seal(s), apply a light coating of
lightweight lithium base grease to the seal lip(s). Oil the
bearings liberally when installing.
1
2
Do not use compressed air to spin the bearings dry.
This causes damage to the bearing surfaces.
NOTICE
Summary of Contents for EF2200iS
