P106 PUMP ADDR.
Selects an address (1-8) for each HYDROVAR
P106 PUMP ADDR.
1
Actual Value
Output Freq.
Left fct.
Up fct.
Down fct.
Right fct.
If several MASTER inverters are connected via the internal RS-485 interface (maximum
eight in Cascade Serial mode), then the following must apply:
• Each HYDROVAR needs an individual pump-address (1–8)
• Each address can only be used once.
P110 SET PASSW.
Set a system password (00000 - 09999); default setting is 00066.
P110 SET PASSW.
00066
Actual Value
Output Freq.
Left fct.
Up fct.
Down fct.
Right fct.
P115 LOCK FUNCT.
By using this parameter, the user can lock or unlock parameter settings in the main menu.
P115 LOCK FUNCT.
Off
Actual Value
Output Freq.
Left fct.
Up fct.
Down fct.
Right fct.
where possible settings are:
Setting
Description
ON
No parameters can be changed without the system
password.
OFF
All parameters in the main menu can be changed.
P120 DISP.CONTR.
Adjust the display contrast (10 - 100%)
P120 DISP.CONTR.
75 %
Actual Value
Output Freq.
Left fct.
Up fct.
Down fct.
Right fct.
P125 DISP.BRIGHT.
Adjust the backlight brightness of the display (10 - 100%)
8 Programming
56
HVL 2.015-4.220 Installation, Operation, and Maintenance Manual
Summary of Contents for hydrovar
Page 1: ...Installation Operation and Maintenance Manual HVL 2 015 4 220...
Page 2: ......
Page 114: ......
Page 115: ......