Xtreme DVR82-ENG-V.2 H.264 User Instructions Download

Page: 9 / 156

Stand-alone DVR (Digital Video Recorder) Unit

DVR82XX

is the most reliable and functional embedded DVR system available today. The

system displays 16 channels of live images in Real Time speed, compresses data digitally and

records them to the Hard Disk Drive, which can be replayed and searched easily any time.

The

DVR82XX

supports easy back up via USB port, DVD R/W, CD R/W and networking in both

static & dynamic IP modes.

User can remotely view live images or search the recorded images.

Under emergency situation, the remote operator can control, turn on and turn off the field

installed alarms, such as a siren or light.

It is a very user- friendly DVR system. User can control the

DVR82XX

by Mouse or Buttons on

the front panel or Remote controller.

Summary of Contents for DVR82-ENG-V.2 H.264





























































































































































Search results

Summary of Contents for DVR82-ENG-V.2 H.264

Reviews:

Related manuals for DVR82-ENG-V.2 H.264

Brands by name

Popular brands

Xtreme DVR82-ENG-V.2 H.264, User Instructions

Search results

Summary of Contents for DVR82-ENG-V.2 H.264

Reviews:

Related manuals for DVR82-ENG-V.2 H.264

Brands by name

Popular brands