manualshive.com logo in svg

Xtreme DVR82-ENG-V.2 H.264, User Instructions

Share
Download
Xtreme DVR82-ENG-V.2 H.264 User Instructions Download Page 80

Stand-alone DVR

 Instruction Manual

 

 

 

78

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8-2.4. PASSWORD 

 

▫

 ON/OFF 

Select ON or OFF by clicking the mouse. 

If the ON is selected, the password has to be entered to get into the SETUP mode, 

RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network 

through the 

DvrViewer

.  

▫

 PASSWORD CHANGE 

Click the password “********” button and the On Screen Keyboard will be displayed as 

shown in Fig.8-18. The factory default password is “11111111”. Delete the existing 

password with the 

  button on the On Screen Keyboard. Enter the new password by 

using the On Screen Keyboard and click on the OK button to save. 

The password should 

be 8 digits.

   

If you executed the factory default setting, the existing password will be changed to 

“11111111”. 

▫

SETUP window 

 Or 

  If you press the button, [Figure 

7-19. PASSWORD setting window] appears. 

[Fig.8-17 BACKUP CONFIG window] 

Summary of Contents for DVR82-ENG-V.2 H.264





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands