Product Guide
VESDA ECO Detector by Xtralis
44
Configuration
17898_05
General Tab
The ‘General’ tab, shown in Figure 27 is used to set-up the ECO Location and
Modbus address.
Figure 27 ECO Detector, General Tab
The ‘Location’ field should be edited to clearly identify where in the system pipe
network the ECO detector is placed, and is limited to 32 characters. The contents
of this field will appear next to the ECO device in the Xtralis VSC overview field, see
below
When using the Modbus interface, the ‘Modbus Address’ field can be used to
change the ECO detector’s address on the bus. From the factory, the default value
