VESDA ECO Detector by Xtralis
17898_05
Overview
Overview
This product guide describes the features of the VESDA ECO gas detector, its’
technical specifications, an understanding of its components and their function.
Instructions on installation, cabling and powering the detector, plus necessary
routine maintenance requirements are also included.
This product guide is for anyone involved with the specification, installation
maintenance or purchasing of a VESDA ECO gas detector when used with a
VESDA Aspirated Smoke Detection (ASD) system. It is assumed that anyone using
this manual has knowledge and the appropriate certification from the local fire and
electrical authorities.
Introduction to the VESDA ECO
The VESDA ECO adds gas detection capability to existing or new installations of
VESDA Aspirated Smoke Detection (ASD) systems; utilising the same 25mm or ¾”
BSP air sampling pipe network.
The VESDA ECO can detect a range of flammable, toxic and oxygen gas hazards
and provides a greater area of coverage than traditional fixed point gas detection
systems.
VESDA ECO is designed for use in indoor areas only.
This product is NOT designed or certified for use in Hazardous area
applications, and therefore must not be installed in such areas.
The embedded and PC software complimenting the VESDA ECO provides a wide
range of user defined parameters and reporting capabilities.
The detector easily interfaces with remote audible / visual indicators or a 3
controller such as a fire alarm panel or building management system.
Packing Contents
As shipped, the product packaging contains the following items which
for installation and commissioning of the product.
•
VESDA ECO Gas Detector
•
VESDA ECO Product Guide
•
USB Interface Lead
•
2GB microSD Card
Product Guide
1
VESDA ECO gas detector, its’
technical specifications, an understanding of its components and their function.
, cabling and powering the detector, plus necessary
specification, installation,
purchasing of a VESDA ECO gas detector when used with a
It is assumed that anyone using
is manual has knowledge and the appropriate certification from the local fire and
The VESDA ECO adds gas detection capability to existing or new installations of
ystems; utilising the same 25mm or ¾”
The VESDA ECO can detect a range of flammable, toxic and oxygen gas hazards
fixed point gas detection
designed or certified for use in Hazardous area
applications, and therefore must not be installed in such areas.
The embedded and PC software complimenting the VESDA ECO provides a wide
The detector easily interfaces with remote audible / visual indicators or a 3
rd
party
controller such as a fire alarm panel or building management system.
the following items which are required
