Product Guide
VESDA ECO Detector by Xtralis
24
Principles of Operation
17898_05
Principles of Operation
Before You Begin
To perform configuration operations on the ECO Detector you will need to have the
Xtralis VSC software tool installed on your computer. The software is available from
the Xtralis website along with installation instructions, which can also be found in
Appendix B.
It is possible to connect and configure the ECO Unit using a USB connection made
to the integrated mini-B USB connector which is located beneath the rubber
grommet on the enclosure cover. (See Figure 13).
Note : While it is possible to communicate with the ECO unit via the USB port
without the need for additional connections, some of the internal systems within the
ECO require the presence of the power supply input connection. Without the
principle power supply applied, some fault conditions may be reported.
Remove the rubber grommet (A in Figure 13). Connect from a USB port on your
computer to the USB port (B) on the detector using a USB lead with a mini-B
connector to the detector.
Figure 13 USB Connection