K021 Instructions v1.0
Bag H
Page
56
INSTALL THE SHOCKS
H3)
Consult the Set-Up sheet and tuning Section to determine where you will mount
the rear shocks. Here we are using the #2 hole. Install two 4-40 X 3/4” cap head
bolts (6004) from the rear of the tower and secure with the two standard nuts
(6070).
H4)
Gather the shocks and spring cups. Pull the shock shafts
out as far as they will go. We have supplied brown
springs (ASC 6493) for the front and silver (ASC 6478)
for the rear. Slide each spring up from the bottom until it
engages the shock collar
H5)
Compress the spring toward the top of the shock, exposing the shaft. Place the
spring cup (ASC 9606 & 9607) over the shaft above the shock bottom eyelet.
The round side of the cup is toward the spring. Slide the cup down over the
eyelet and release the spring. The spring should seat properly on the cup.
1
2
3
1
2
3
4
