K021 Instructions v1.0
Bag D
Page 27
D7)
Install the left side of the diff with bearing into the left trans case. The head of the
diff screw should be up (arrow). We removed the white cap for this photo. Make
sure all the gears are properly meshed. Set the left case half aside for now.
D8)
Insert the remaining 3/16” X 3/8” rubber sealed bearing (6200) from Bag D into
the top shaft boss in the right transmission case half. Some Team drivers place
a small bead of inexpensive grease around the mating surface of the right
transmission case half. (small arrows) This grease helps keep dirt out and does
not lubricate anything. Grease attracts dirt; paradoxically this grease seals out
dirt, so use no more than is necessary. Just a touch means so much.
