K021 Instructions v1.0
Shocks
Page 50
S7)
Apply a coating of shock oil to the
seal. Then carefully insert the shock
tool, seal first, into one of the two
shock bodies. The tip of the tool will
barely protrude from the shock body.
Place the bottom of the tool on a
solid surface and push down hard on
the shock body until the clamp piece
“snaps” into place. With the shock
tool removed, you should be able to
look down the body and see the
clamp with its four corners tucked
securely into the body.
TEAM TIP: Most Team drivers use ASC 1105
Green Slime on the O-Rings instead of
shock oil.
S8)
Repeat steps S6 and S7 for the other shock body.
2
3
1
4
5
