K021 Instructions v1.0
Bag E
Page
35
E6)
Turn the chassis upside down and mate the bulkhead to the chassis. Take care
that the threaded inserts remain in the hexes in the bulkhead and go into their
hexes in the chassis. This is a pain to do, but most likely you’ll only have to do it
once. When you’ve got it right, secure the bulkhead by installing the 5/8” cap
head from E5 above.
INSTALL THE TRANSMISSION
E7)
Place the transmission with motor plate in its box. It should be a snug fit but
should slide up and down without too much force. Check that nothing is
catching. The motor plate should be snug against the right side of the motor
plate support.
1
2
3
4
5
