K021 Instructions v1.0
Bag F
Page 38
BAG F
BUILD THE C-CVDs
F1)
Open the bottom of Bag F and get out the C-CVD parts. (5800 -- left photo) Set
the wheel nuts, two aluminum spacers, and two smaller black roll pins aside.
The first work on the C-CVD axles will use the two driveshafts, two axles, solid
silver pins, CVD couplings, and white rings. (right photo)
F2)
We’ll build one axle first, then the second. Insert the black cylindrical coupling
into the head of the CVD Axle. Be certain the hole in the coupling lines up with
the slot in the axle so you can see completely through the coupling’s hole.
F3)
Keeping the coupling in place, put the axle & coupling into the cup of the
driveshaft. Align the coupling hole with the holes in the driveshaft and slide the
silver pin through so it is flush with both sides of the driveshaft cup.
