K021 Instructions v1.0
Bag G
Page 47
G12) Consult the Tuning Section and Set-Up Sheet to determine your anti-squat
setting. Bag G contains a small bag of plastic anti-squat shims (3250), four .060”
and two .030” that allow you to adjust in increments of .030” from zero to .150”
Here we have used one .030” and one .060” shim to make .090”. Slide your
shims over the two holes in the chassis and under the toe-in bar. Secure the toe-
in bar and shims from below using two 4-40 X 1/2” flat head screws (6023). If
you use zero shims, the screws may protrude from the top of the bar. Now
tighten the cap head screws from G10 above.
Almost finished now.
