![background image](http://html1.mh-extra.com/html/xerox/xdl23/xdl23_user-manual_4149854009.webp)
Safety notes
XDL23/XDL33/XDL33D User Guide
1
Safety notes
Your copier and supplies meet strict safety requirements. These requirements include safety
agency examination and approval and compliance to any established environmental standards.
Please read the following instructions carefully before operating the copier, and refer to these
instructions, as required, in order to ensure the continued safe operation of your copier.
Follow
all the warnings and instructions which are marked on or supplied with the product.
Unplug
the copier from the wall outlet before cleaning it. Always use the materials which are
specifically designated for the copier. Use of any other materials may result in poor performance
and may create a hazardous situation.
Do not
use aerosol cleaners. Follow the instructions in this user guide for the proper cleaning
methods.
Never
use any supplies or cleaning materials for purposes other than what they are intended.
Keep all supplies and materials out of the reach of children.
Do not
use the copier near water, wet locations, or outdoors.
Do not
place the copier on an unstable cart, stand, or table. The copier may fall, and thereby
cause personal injury or serious damage to the copier.
This product
is equipped with a three-wire, grounding-type plug (in other words, a plug having a
third grounding pin). This plug fits into a grounding-type power outlet only. This is a safety
feature. If you cannot insert the plug into the outlet, contact your electrician in order to replace the
receptacle; this ensures that you will avoid the risk of electric shock. Never use a ground adapter
plug to connect the copier to a power source receptacle which lacks a ground connection
terminal.
This copier
should be operated from the type of power source which is indicated on the marking
label. If you are uncertain as to the available power type, consult your local power company.
Do not
allow anything to rest on the power cord. Do not locate the copier where persons will step
on the cord.
The power supply cord
is the disconnect device for this equipment. Ensure that the installation
of the copier is near the outlet and that the outlet is easily accessible.
Your copier
is equipped with an energy saving device which conserves power when the copier is
not in use. The copier may be left on continuously.
Slots and openings
in the copier cabinet provide ventilation; these slots and openings are
located in the back and the sides of the copier cabinet. In order to ensure the reliable operation of
the copier and to protect it from overheating, these openings must not be blocked or covered. Do
not place the copier near or over a radiator or heat register. Do not place the copier in a built-in
installation unless proper ventilation is provided.
Summary of Contents for XDL23
