manualshive.com logo in svg

Xerox XDL23, User Manual

Share
Download
Xerox XDL23 User Manual Download Page 39

Making copies

XDL23/XDL33/XDL33D User Guide

31

Using the document glass

You can use the document glass to make a copy of a delicate or
damaged original or to make copies of a reliable original.

Note:

 The ADF is available on some models, the DADF is

available with the XDL33D model only.

Procedure:

1.  Open the document cover or ADF/DADF.

2.  Place the original, 

face down

, on the document glass

and register it against the left rear corner of the glass.

3.  Close the document cover or ADF/DADF.

 

Caution:

  When copying a thick original, do not use

excessive force to press down on the document cover or
ADF/DADF.

4.  Select any desired basic and/or added copy features.

 (Refer to the sections entitled 

How to use the basic

copying features

 or 

How to use the added copying

features

.)

5.  Enter the copy quantity.

 

Note:

  99 maximum

6. Press 

the 

Start

 button, 

.

Summary of Contents for XDL23




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands