Xerox XDL23, User Manual, Page: 96 / 123

Problem solving
88 XDL23/XDL33/XDL33D User Guide
Status code list
(continued)
H1 Problem with paper tray 5. Try reloading the paper. Do not fill above the MAX line.
Switch the copier off and then on. You can use another tray for copying. If status code
continues, call for service.
H6 Problem in the ADF/DADF. Remove all the originals. Switch the copier off and then
on. Reload the originals. You can use the document glass for copying. If status code
continues, call for service.
When the toner cartridge replacement indicator flashes, the toner cartridge will need to
be replaced soon. Be sure to have a replacement cartridge in stock.
J1 Replace the toner cartridge, refer to the appropriate procedure in the section entitled
Copier care .
J3 The drum cartridge is not in place. Open the front cover and reinstall the cartridge,
refer to the J7,
, procedure in the section entitled Copier care .
When the drum cartridge replacement indicator appears, the drum cartridge will need
to replaced in approximately 5,000 copies. After the approximate 5,000 copies, the J7
status code will appear and the copier will stop.
J7 Replace the drum cartridge, refer to the appropriate procedure in the section entitled
Copier care .
J8 The wrong drum cartridge was installed. Open the front cover and install the proper
cartridge, refer to the J7,
, procedure in the section entitled Copier care . Ensure
drum cartridge, 13R555 is installed.
L6
XEROX
card or key counter is not loaded. Install the
XEROX
card or key counter.
U1-U4, U6-U8 Switch the copier off. Wait approximately one (1) minute, then switch the copier on. If
the status code continues, call for service.