Making copies
XDL23/XDL33/XDL33D User Guide
35
Using the bypass tray
Use the bypass tray to run short copy jobs, to use a different
copy paper size, or to copy onto special paper stock.
For detailed information on how to load copy paper into the
bypass tray, refer to the section entitled
Loading the trays
and for
the paper specifications, refer to the section entitled
Paper
.
Procedure:
1. Open the document cover or ADF/DADF.
2. Place the original,
face down
, on the document glass
and register it against the left rear corner of the glass.
3. Open the bypass tray door.
4. Slide out the extension tray to the desired paper length.
5. Adjust the paper guide to the desired paper width.
Summary of Contents for XDL23
