How to use the basic copying features
56
XDL23/XDL33/XDL33D User Guide
7. Remove the copies from the output device, and reorder
them so that the last copy is first and the first copy is
last: …6, 4, 2.
Note:
If your copy quantity is more than one copy, you
must reorder the copies as follows: 6, 6, 6…, 4, 4, 4…,
2, 2, 2… Ensure that all the last copies (6, 6, 6…) are on
the top of the stack.
8. Load the reordered copies into the same paper tray as
the one used in Step 4. The copies must be
face up
and
the bottom of the image must be placed toward the front
of the tray.
9. Place the odd-numbered originals (1, 3, 5…) in the ADF.
Ensure that the originals are
face up
and in the same
direction as your even numbered originals were.
10. Select the paper tray which contains the reordered,
even-numbered copies.
11. Select the same copy quantity as you did in Step 5.
12. Press the
Start
button,
.
13. Remove your 2 sided copies from the output device.
Summary of Contents for XDL23
