![background image](http://html1.mh-extra.com/html/xerox/xdl23/xdl23_user-manual_4149854027.webp)
Getting to know your copier
XDL23/XDL33/XDL33D User Guide
19
Normal copy mode
XDL23/XDL33 only
When the copier is switched on, the copier enters a warm-up
cycle and the
Please wait
icon becomes lit,
. During the
warm up cycle, the copier does not respond to the
Start
button. Copying may begin when the
Ready to copy
icon
becomes lit,
, this icon indicates that the copier is in the
normal copy mode.
XDL33D only
When the copier is switched on, the copier enters a warm-up
cycle and the message "
Please wait...Copier warming up
"
appears on the message display.
During the warm up cycle, the copier does not respond to the
Start
button. Copying may begin when the message "
Ready
to Copy
" appears on the message display; this message
indicates that the copier is in the normal copy mode.
Automatic Clear
This copier automatically returns to the normal copy mode
approximately sixty (60) seconds after a job is completed; the
automatic clear feature is enabled at the factory. The feature
can be deactivated by referring to the section entitled
Customizing your copier
.
The automatic clear settings are preset at the factory and are as
follows:
Copy density
•
Auto
Reduce/enlarge
•
100%
Paper supply
•
Auto
Copy quantity
•
1
Note:
The factory default settings may be changed in order to
meet your specific copying needs. Refer to the section entitled
Customizing your copier
for more information.
Summary of Contents for XDL23
