Copier care
XDL23/XDL33/XDL33D User Guide
81
Cleaning the ADF/DADF belt
Keeping the ADF/DADF belt clean helps prevent ADF/DADF
misfeeds.
XEROX
suggests that you clean the belt as needed.
Note:
This procedure is for copiers which are equipped with the
ADF/DADF.
Caution:
Do not
pour or spray water directly on the belt.
Procedure:
1. Switch the copier off.
2. Slightly dampen a soft lint-free cloth or paper towel with
water.
3. Raise the ADF/DADF.
4. Cover the document glass to prevent water from spilling
on the glass.
5. Wipe the exposed surface of the belt until it is clean.
6. Pull the belt from the right to left to expose dirty sections
of the belt.
7. Repeat the cleaning procedure until the entire belt is
clean and dry.
8. Close the ADF/DADF.
9. Switch the copier on.
Summary of Contents for XDL23
