Xerox XDL23 User Manual Download Page 86

Page: 86 / 123

Copier care

XDL23/XDL33/XDL33D User Guide

Cleaning the document glass and cover

Keeping the document glass and document cover clean helps
ensure the best possible copies.

XEROX

suggests that you clean

the document glass at the start of each day and during the day
as needed.

Caution:

Do not

pour or spray water directly onto any part of

the copier.

Note:

For copiers equipped with the ADF/DADF refer to the

ADF/DADF belt cleaning section to clean the belt.

Procedure:

1. Slightly dampen a soft lint-free cloth or paper towel with

water.

2. Open the document cover or ADF/DADF.

3. Wipe the surface of the document glass until it is clean

and dry.

4. Wipe the underside of the document cover until it is

clean and dry (skip this step if there is an ADF/DADF on
the copier).

5. Close the document cover or ADF/DADF.

Summary of Contents for XDL23




























































































































Search results

Summary of Contents for XDL23

Reviews:

Related manuals for XDL23

Brands by name

Popular brands

Xerox XDL23, User Manual

Search results

Summary of Contents for XDL23

Reviews:

Related manuals for XDL23

Brands by name

Popular brands