How to use the added copying features
XDL23/XDL33/XDL33D User Guide
65
Edge deletion
Select this feature to delete unwanted images on the edge of
a copy (example: punched holes).
Note:
The factory default is set to a 10mm edge deletion.
To change the default, refer to the section entitled
Customizing your copier
.
Procedure:
1. Ensure your originals are loaded in the appropriate
copier location.
2. Press
the
Edge deletion
button,
.
Note:
The bypass tray can not be selected.
3. If required, select the desired basic and/or added
copying features.
(Refer to the sections entitled
How to use the basic
copying features
or
How to use the added copying
features
.)
4. Enter the copy quantity.
5. Press
the
Start
button,
.
Summary of Contents for XDL23
