Xerox XDL23, User Manual

Page: 14 / 123

Helpful hints
6 XDL23/XDL33/XDL33D User Guide
Helpful hints
Care of your copier:
•
Do not place heavy objects on any surface of the copier.
•
Ensure that liquids are not placed near or spilled onto the
copier.
•
Do not place paper clips or staples on the copier surface.
•
As required, refer to the section entitled Copier care .
Maintenance:
•
Clean the document glass daily.
•
Do not apply cleaning liquids or sprays directly on to the
copier; first apply the liquid onto a cloth.
•
Store copy paper on a flat surface in a dry area and in an
enclosed cabinet.
•
Tightly wrap any partially used reams of paper.
Copier location:
•
For reliable copier operation and copy quality,
XEROX
recommends the following:
•
Place your copier in a well-ventilated room.
•
Ensure that the environmental conditions are:
−
Temperature: 50
o
F-95
o
F(10
o
C-35
o
C)
−
Relative humidity: 15-85%
Note: If the temperature is at 95
o
F(35
o
C),
humidity should be below 47.5%; if humidity is at
85% temperatures should be below
82
o
F(27.8
o
C).
•
Place the copier on a flat level surface:
−
Ensure that the copier is level; this provides
optimum performance
•
Avoid locations that subject the copier to:
−
Direct sunlight
−
Extreme changes in the temperature or humidity
•
After selecting a location that meets the conditions listed
above, ensure there is sufficient floor space around the
copier for service (refer to the section entitled
Floor
space requirements , in this section).