Xerox WorkCentre Pro 421, User Manual

Page: 206 / 224

A-10 WorkCentre Pro 421 User Guide
NOTE: Although this product can use either loop disconnect
(pulse) or DTMF (tone) signalling it is recommended that it is
set to use DTMF signalling. DTMF signalling provides reliable
and faster call set-up.
Modification, connection to external control software or to
external control apparatus not authorised by Xerox, will
invalidate its certification.
FCC Regulations
Send Header Requirements
Federal Communications Commission (FCC) regulations
require all persons within the United States who send any
message via a facsimile machine to include an identifying
message in the transmission. The message must clearly
contain an identifier and telephone number for the entity
(business or individual) sending the message.
This facsimile machine provides the local ID and name
features required for the FCC regulation. To satisfy the FCC
regulation, the telephone number and name must be included
with the printed document. To comply with the FCC rules,
carefully read and follow the instructions listed in this document
to program the local ID and name.
Data Coupler Information
This Xerox machine contains an internal data coupler. Its use
is restricted by the FCC (Federal Communications
Commission). To comply with the FCC rules, you must
carefully read and follow the instructions listed below.
This equipment complies with Part 68 of the FCC rules. On the
rear of this equipment is a label that contains, among other
information, the FCC registration number and Ringer
Equivalence Number (REN). If requested, provide this
information to your telephone company.