Xerox WorkCentre Pro 421 User Manual Download Page 104

Page: 104 / 224

4-30

WorkCentre Pro 421 User Guide

Open a document and select the Print option.

Open the printer driver Properties dialog and select the
Overlays tab.

Select the overlay you want to download from the
overlays list.

Select the Download Now button, and select the
destination.

Select the OK button. A status box will confirm that the
overlay has been downloaded.

Query Page Overlay

Selecting this option causes you to be prompted to confirm that
you want to download a page overlay each time an overlay is
sent to the printer.

If the option is unchecked, the selected page overlay file will
always be sent to the printer.

NOTE: This option is not enabled if No Overlay is enabled or if
the selected overlay has been permanently downloaded to the
printer.

Selected Overlay Status

This box provides status information for the selected overlay.

Overlay Creation Status

This box provide status information during the overlay creation
process.

Summary of Contents for WorkCentre Pro 421
































































































































































































































Search results

Summary of Contents for WorkCentre Pro 421

Reviews:

Related manuals for WorkCentre Pro 421

Brands by name

Popular brands

Xerox WorkCentre Pro 421, User Manual

Search results

Summary of Contents for WorkCentre Pro 421

Reviews:

Related manuals for WorkCentre Pro 421

Brands by name

Popular brands