2-2
WorkCentre Pro 421 User Guide
System Overview
The WorkCentre Pro 421 is a digital device capable of copying
and printing.
When you switch on the power and the system has warmed up,
the machine is in the Ready mode and is ready to use.
Ready mode is where the LCD screen is visible and ready to
be programmed for a job. The message displays “Ready to
copy”:
Copy Walk-up Screen
When an action completes successfully, the machine returns
to Ready mode.
You can change the default settings of the machine by
pressing the Machine Status key.
HINT: Refer to “Machine Defaults & Setups” on page 7-1 for
detailed instructions on how to change these setups.
NOTE: Depending on your machine configuration some
features and functions may not be available. The following
pages give specific configuration information.
Using Department Codes
If the Department Code function has been enabled and
individual Department Codes have been setup, the Ready
mode screens prompt users to enter a Department Code
before access to the machine is allowed.
Ready to copy
Paper :
Auto
Output :
Collated
Added Features
L/D
: Auto
R/E
: 100%
1
Summary of Contents for WorkCentre Pro 421
