Xerox WorkCentre Pro 421 User Manual Download Page 156

Page: 156 / 224

7-2

WorkCentre Pro 421 User Guide

Changing Machine Defaults

Use the following instructions to access the Machine
Default options. Instructions for customizing each Machine
Default setting is then provided.

NOTE: Some options are not available in all Markets and
for every machine configuration. Therefore, feature
numbering can vary.

Quick Pathway

Machine Status

Default settings

Machine defaults

To access the Machine
Defaults menu while in the
Ready mode, press the
[Machine Status] key located
to the right of the LCD.

The Machine Status menu
displays the settings options.

Ensure [Default settings] is
selected and press [Enter].

Machine status

01. Default settings

02. Print report
03. Initial setup

Select [Machine defaults] and
press [Enter].

Default settings

01. Machine defaults

02. Copy defaults
03. Printer defaults

The Machine Defaults options
display.

Machine defaults

01. Paper trays

02. Timers
03. Interrupt key

Summary of Contents for WorkCentre Pro 421
































































































































































































































Search results

Summary of Contents for WorkCentre Pro 421

Reviews:

Related manuals for WorkCentre Pro 421

Brands by name

Popular brands

Xerox WorkCentre Pro 421, User Manual

Search results

Summary of Contents for WorkCentre Pro 421

Reviews:

Related manuals for WorkCentre Pro 421

Brands by name

Popular brands